Skip to main content
Patented

Makro•Grip® 125, 5-Axis Vise jaw width 125 mm, clamping range 0 - 155 mm Item No. 48155-125

clamping range 0 - 155 mm
clamping range 0 - 155 mm clamping range 0 - 205 mm clamping range 0 - 255 mm clamping range 0 - 305 mm clamping range 0 - 355 mm

Address & Contact

LANG Technik Schweiz AG
Sandgrube 29
9050 Appenzell, Switzerland

Key data at a glance

The shortest 5-axis vise with a jaw width of 125 mm has a maximum clamping range of 155 mm with a base body length of just 160 mm. Its compact design, the large clamping range compared to the base body and the good accessibility from all sides, offer excellent conditions for 5-axis machining of blanks. With its jaw serration, the vise holds pre-stamped blanks by form-fit. As a result, only very low pressure is required to clamp components with extreme hold and a high degree of safety. But even without pre-stamping, the 5-axis vise guarantees maximum hold at high cutting forces in raw part machining.

Clamping range
0 - 155 mm (0" - 6.1")
Dimensions
160 x 125 x 89 mm (6.3" x 4.92" x 3.5")
Clamping method
by friction
Workpiece shape
cubic
Packaging Unit
1 Piece
Weight
8.3 kg (18.3 lbs)
Material
Steel

More features:

Torque

100 Nm

Maximum allowed torque

Clamping stud size

20 mm (0.79")

Diameter of clamping studs

Clamping force

20.000 N

Clamping force at maximum torque

Centering accuracy

±0,02 mm

Centering tolerance of vises

Grid system

96 mm (3.78")

Zero-point pitch

Single components features:

Spare Jaws

Dimensions
Jaw width: 125 mm (4.92")

Spindle + Center Piece

Spindle length
164 mm (6.46")
Thread pitch
M20 x 1.5

Clamping Studs

Diameter
20 mm (0.79")
For grid size
96
Threaded pin
M10
Notice:
Scope of delivery:

Makro•Grip® Stamping Technology and Raw Part Clamping

The Makro•Grip® 5-Axis Vise and its unique benefits of the stamping technology has been considered „The Original“ and a benchmark in the 5-face machining of raw parts for years. Its compact design and high holding forces make the Makro•Grip® 5-Axis Vise the ideal clamping device for machining raw parts.

  • Holding force Thanks to the form-fit clamping principle, highest holding forces can be achieved with Makro•Grip®, even at low clamping pressure.
  • Process reliability Clamping with Makro•Grip® provides maximum process reliability and is easy on the workpiece to be processes at the same time.
  • Accessibility The compact Makro•Grip® self-centering vises guarantee ideal accessibility in the 5-axis machining of raw parts.

Learn all about the benefits and functionality of ourMakro•Grip® Raw Part Clamping and Stamping Technology.

Discover now

Application pictures

Application videos

Downloads

CAD models
Data sheet
Instruction manual

Services

We will be happy to advise you individually and adapt your products for the best possible application.

Contact us

Makro•Grip® Raw Part Clamping and Stamping Technology

Discover now:

Clamping parts by form-fit – For years the Makro•Grip® technology has been the benchmark in the 5-axis machining of raw material.

Learn more
Makro•Grip® Raw Part Clamping and Stamping Technology